Quick Detail:

AAC Cutting Machine is a main equipment of AAC Production Line. In the annual production capacity of 50,000 M3 and above, this machine is a core machine. Because of our advanced technology, it reduces the damage of the block in the second hoisting. So, the products sell well all over the country, and won the overwhelming majority of users.

Description:

AAC Cutting Machine is the key equipment in the AAC production line, including two categories. One is ground turnover multiple-step machine and the other is aerial turnover multiple-step cutting machine. There are two types of aerial multiple-step cutting machine. One is stationary type for cutting of traveling; and the other is moving type. Stationary type multiple-step cutting machine is made up of longitudinal (horizontal) cutting machine, transverse (vertical) cutting machine, cutting trolley, rails, pneumatic control system and electrical control system. When two cutting trolleys are put into operation (i.e., double-trolley mode) and the side elevator is equipped to hold; for replacement of trolley, the productivity of the cutting machine will be significantly increased. As to the moving type multiple-step cutting machine, it consists of longitudinal cutting trolley, transverse cutting trolley, cutting rack, rails, pneumatic control system and electrical control system, and so on.

Working Principle：

1. Aerial turnover crane brings the green cake in to sky, turnover 90 degrees, puts it onto the cutting car, cuts the base body with side panel which is powered by electric and walk to stay, finish cuts vertically.

2. Cutting car continues moving after the central position of the crosscut device stops, the crosscut device is started, crosscut shelf cuts the block from top to bottom in vertical cutting.

3. Cutting car walks to organize into groups. The hanger hangs the green cake, and raise up out of curing car, cutting car returns to primitive position to carry on the next cutting circulation.

Technical Parameter：

1.Longitudinal AAC Cutting Machine


2.Transverse AAC Cutting Machine


3.AAC Cutting Trolley

Competitive Advantage:

1. The machine structure is simple and practical, the maintenance is easy;

2. The green cake is sideward, so the width of the whole green cake is 600mm, and the height is 1200mm. Steel wires for cutting is short, which is also difficult to rupture and float. It is high in cutting precision;

3. The vertical cutting device is fixed. Crosscut device cuts the green cake vertically by steel wires. It shortens the cutting steel wires length, guarantee precision of cutting;

4. This machine cuts the green cake in Hexahedron-type, so the products quality wont be influenced by the distortion of the mould;

5. Cylinder Tension, which supply gas to each wire respectively;

6. Avoiding the wires being stretched off by using a special device;

7. Life of the wire can extend (Usually 10 days, Now 20 days);

8. Operating it in use of the computer touch panel, realize separation of Man-Machine.

Description:
Our machine adopt cold bonding method to manufacturing bimetal rivets.
Those contact rivets to be widely used in circuit breaker, timer, starter, relays, contactors, switches etc.
Our machine can use following Contact material: Ag, AgNi, AgCdO, AgSnO2, etc.

Technical Parameter:
1. Rated voltage: Three-phase 380V +_10% 50Hz
2. Main motor: 1.5KW
3. Equipment weight: 1200KG
4. Head diameter: 2.4 - 7mm
5. Shank diameter: 1.2 - 3.5mm
6. Shank length: <=7mm
7. Production speed: 5000-9000p/h (stepless speed regulation)
8. Adopt double knives to cut the material

Competitive Advantage:
80% of share in China,
Production capacity of 300 machines in 2007,
Biggest output worldwide, CE & ISO9001:2000,
Competitve price, technical support

For more information please contact us:

Description:
The concrete mixing plant series we have are the equipments which can be used to produce dry and stiff plastic concrete. Our company has many years' producing experience. The consumers are all over the country.

Technical Parameter:

Competitive Advantage:
1. Adopting twin forced horizontal shafts stirrer
2. The aggregate is measured alone or accumulated by the electronic scale.
3. Water and the additive are measured accurately under the centralized control of the computer.
4. The whole machine adopts PC to control, which is easy to operate and debug.
5. Two models for feeding aggregate: one by bucket elevator, the other by belt transfer.
6. The main electric elements are the devices of Schneider in France; the programmable controller is the product of Siemens.

Quick Detail:
The autoclaving trolley is spliced by the 14th and the 18th channel steel.
Wheels are made of steel forgings so that to improve the wheel life.

Technical Parameter:

Description:
This machine is one kind of conveying and packaging line for wooden pallets which is mainly designed for the finished AAC blocks. The whole mould of product will be moved onto the wooden pallet at one time by means of clamping device for finished products for further conveyance, distribution and packaging on this line. This machine has such characteristics as automatic distribution by the control of computer, precise positioning during conveyance and automatic separation of loaded wooden pallets, in which case it is convenient for packaging and subsequent shipment.

Technical parameters:
1. Centerlines of two chains will be spaced at 550mm. total distance between centerlines of chins will be 1100mm.
2. Chain surface will be in elevation of 653.6mm above the mounting foundation.
3. Distribution Reductor: GS57-0.75kW 15r/min Drive Reductor: GR77-2.2kW 22r/min
4. Drive Chain: 16A P25.4 Carrier Chain: 20A P31.75
5. Conveying Speed: about 13.8/min

Changzhou Success Building Material Machinery Co.,Ltd is a professional and experienced manufacturer of autoclaved aerated concrete(AAC) block production equipment. The AAC production line we design exclusively for you can achieve annual output (production capacity) of 50,000m3 100,000m3, 150,000m3, 200,000m3, 250,000m3, 300,000m3 AAC blocks according to your business plan. So far, our products have been exported to over 15 countries and regions across the world. The whole production line includes mixing and pouring machine, cutting machine, autoclave,separating machine and so on. We not only supply single equipment but also undertake turnkey project.

The machine has automation technology, which can quickly and efficiently complete operations such as automatic feeding, conversion, feeding and masonry. It can accurately control the spacing between the masonry lining and the modules, and ensure that the size of each masonry block is consistent, thereby improving the efficiency of masonry and reducing construction costs.In addition, it adopts a programmable control system to realize touch operation, which can intuitively realize product quantity calculation, and the operation is more convenient and simple.The AAC Block Production Line of Changzhou Success Building Material Machinery Co., Ltd can meet the masonry needs of various building components. It is an efficient masonry equipment, which can make your building quality more accurate, improve the construction process, and save construction costs.

1.Stocking and supplying raw materials

2.Processing raw materials

3.Batching and pouring

4.Cutting

5.Grouping and maintaining process

6.Steaming in autoclaves

7.Final products packaging

1.Production Line Design
Including: drawing of plant working process , drawings of land construction, drawings of power working, drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction.

2.Technical Guidance of Building Factory
Including: consultation of facility, Equipment installation guide, constitution the production preparation, etc.

3.Providing the technical information of setting up factory
Including: part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.

Brief Introduction of Concrete Pile Production Line 

We are the professional manufacturer of concrete pile equipment and have engaged in this field for many years. We own the abundant production experience and the advanced technology. Our customers are from many countries such as Kenya, Indonesia, Turkey, etc.

On-site Photos of Concrete Spun Pile Project in Kenya

Key Machines of Concrete Pile Production Line

Advantages of Concrete Pile

1. High strength and high quality

2. Long service life

3. Economical

4. Many selections in Length and Diameter

Service We Supply

1. Plant Layout Design

2. Foundation Layout Design

3. Equipment Installation

4. Commissioning

5. Personnel Training 

Description:
This mould is used for electric concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory products two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Working Principle:
1. The steel mould should work together with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2. Put the mixed slurry into the mould and rotate in different directions under the motor driven.
3. In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength. And then, the pole forms around the inner wall of the pole mould.

Competitive Advantage:
1. Welding technology, this enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

Technical Parameter:

Technical parameter of pole steel mould

Description:
Industrial boiler features
Quick fitting or assembly structure.
Compact in structure.
Cheap in cost.

Competitive Advantage:
1. Adopt back water innuendo technology to improve water circulation reliability; Adopt water/fire tube Package structure to save boiler house coverage and reduce cost for installation and investment on infrastructure;
2. Large heating area design philosophy, strong overload capacity;
3. Adopt knockout core fire grate technology for special coal type, reduce coal leak rate, and enhance combustion;
4. Adopt sealed isostatic air chamber, uniform air distribution, and more free adjustment;
5. Heavy boiler is adopted with saw-tooth hearth, more adequate combustion and heat exchange;
6. Adopt large fire grate area to improve boiler coal type adaptability and combustion efficiency;
7. Momentum method designs for furnace arch, more adequate a type flame combustion;
8. High de-dusting efficiency inside boiler, and low original dust exhaust concentration;
9. New-type hearth brick and insulation materials, reduce heat radiation loss but improve heat efficiency;
10. Configure new-type high efficiency slave unit, reduce boiler power consumption but improve slave unit reliability;
11. Complete control function, safe and reliable, higher operation guarantee.

Quick Detail:
The autoclaving trolley is spliced by the 14th and the 18th channel steel.
Wheels are made of steel forgings so that to improve the wheel life.

Technical Parameter:

Description:
This machine is one kind of conveying and packaging line for wooden pallets which is mainly designed for the finished AAC blocks. The whole mould of product will be moved onto the wooden pallet at one time by means of clamping device for finished products for further conveyance, distribution and packaging on this line. This machine has such characteristics as automatic distribution by the control of computer, precise positioning during conveyance and automatic separation of loaded wooden pallets, in which case it is convenient for packaging and subsequent shipment.

Technical parameters:
1. Centerlines of two chains will be spaced at 550mm. total distance between centerlines of chins will be 1100mm.
2. Chain surface will be in elevation of 653.6mm above the mounting foundation.
3. Distribution Reductor: GS57-0.75kW 15r/min Drive Reductor: GR77-2.2kW 22r/min
4. Drive Chain: 16A P25.4 Carrier Chain: 20A P31.75
5. Conveying Speed: about 13.8/min

Pre-stressed Concrete Pole Production Line

The Pre-Stressed Concrete Pole Production Line by Changzhou Success Building Material Machinery Co.,Ltd has a unique design structure, which can meet the production requirements of concrete poles of different building types, such as specific threaded piles, composite poles, etc. Its mechanical power part adopts oil-free lubrication technology, which has a longer service life and stronger anti-fouling performance, which can effectively reduce maintenance costs and improve service efficiency. The production line adopts a fully automatic control system, which can achieve constant concrete flow, constant thickness of the inner and outer layers of the pole, and the concrete concentration from the concrete pouring to the end of the pole, so as to realize the chemical change process of the concrete fluid at one time, eliminating the need for enamelled strands , Mortar powder installation and wearing parts installation and other cumbersome steps, the use is more convenient and efficient.

Our customers are from many countries such as Japan, Iran, Turkey, Afghanistan, Malaysia, Bangladesh and so on.

1．Concrete Batching  (raw materials: Cement, sand, gravel, water, additive )

2．Steel Bar Straightening and Cutting  (Steel Cutting Machine )

3．Steel Bar Heading  (Heading Machine)

4．Placement of Reinforcement Cage into Mould

5．Mould Combination

6．Tensioning  (Tensioning Machine)

7．Spinning  (Spinning Machine)

8．Steam Curing

9．Demoulding

10．Finished Product Storage and Curing

1. Economize steel in a large amount about 30%~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Reduce the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

3. Crack resistance can increase about 3~5 times.
4. Rigidity increases 1~3 times.
5. Good durability can delay the existence and expansion of cracks.
6. Protect the environment on which human beings depend on for existence and reduce the deforestation compared with wooden poles.

Description:
Overhead crane widely used in warehouses, factories, docks and outdoor storage yard, etc.
General electric overhead traveling crane mainly consists of running gear of bridge, crane carriage, metal construction of bridge, and crane carriage is composed of hoisting mechanism, small frame, and running gear of trolly.
Hoisting mechanism, including the motor, brake ,reducer, winding drum and pulley blocks, motor driven rotating drum with reducer ,winding drum and pulley blocks .motor driven rotating drum with reducer ,making wire rope around the drum or from the rell down, in order to lift and lay down heavy objects. Small frame is a rack which can brace and install hoisting mechanism and running gear of trolly.

We can supply different equipment configuration for following AAC production lines:
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 50,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 100,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 150,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 200,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 250,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 300,000m3

Description:

Project Proposal of AAC Production Line AAC Plant
Annual out put 50,000-300,000m3
I  Production Technique
1. Product Principle
1) Technology Orientation
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006.
2) Production Capacity
The product is aerated concrete block/brick and the output is 150,000m3 per year. The first phase can be equipped according to 100,000m3 per year. There is a reservation of plate in consideration of user's need.
3) Product Specification
Products conform to requirement of 04~07 grade block/bricks stated in GB11968-2006.
General Specifications of Aerated Concrete Block/bricks

Description:
Widely apply in machine tools, trafic transportation mechanism, electronics, electricity industry, motor manufacturing industry, auto manufacturing industry, broadcast and communication industry, chemical industry, plastic and rubber products. Applied to steel, carbon steel, ss, diamond, copper, titanium, and ceramics etc.

Technical Parameter:

Competitive Advantage:
It adopts ND: GQ2-14 medium, the fixed light route, the crossing slide movable working table is special for cutting any corner. it can reduce the cutting slot by linearity polarize. The hot distortion is very few, and the cutting slot of straight side is small, the cut edge is very smooth. There is no need to polish or other processing after cutting.
It adopts CNC controlling technology with professional software, which supports AI, BMP, PLT, DXF file formats, and it is easy to operate.
There is a 5 inch display which has 128M memory installed in the machine, which this display can save many files, and you can modify the processing speed and processing power directly using this display. For our machine, can work offline, no need to connect the machine with a computer always.

Description:
This mould is used for electric concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory products two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Working Principle:
1. The steel mould should work together with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2. Put the mixed slurry into the mould and rotate in different directions under the motor driven.
3. In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength. And then, the pole forms around the inner wall of the pole mould.

Competitive Advantage:
1. Welding technology, this enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

Technical Parameter:

Technical parameter of pole steel mould

Quick Detail:
The autoclaving trolley is spliced by the 14th and the 18th channel steel.
Wheels are made of steel forgings so that to improve the wheel life.

Technical Parameter:

Quick Detail:
This equipment is used to have the finished product having been hauled out of autoclave clamped and sent to the expected location (i.e. wooden pallet packaging line), as well as have the bottom panel clamped and sent to the roller conveyor.

Description:
There are two types of hydraulic clamping apparatus, one is for up-and-down layers “cake” and the other is for left-and-right rows of “cake”. This equipment is mounted onto the machining overhead crane and powered by the hydraulic station on that crane. Lifting and clamping will be accomplished by the action of hydraulic oil cylinders. Different synchro devices have been equipped. Such features as no noise, stable operation, and sound synchro performance, etc. are available.

Technical parameters:

Description:
This machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
This machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.
The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.

Working Principle:
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.

Technical Parameter:

Technical parameter of pole spinning machine 1

Technical parameter of pole spinning machine 2

Competitive Advantage:
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
5. Good durability, can delay the existence and expansion of cracks.
6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

Description:
We are professional manufactory of pre-tensioned pre-stressed concrete pipes mould and centrifugal machine. We have engaged in this area for many years and own mature technology, full experience. Our products are in accordance with the standard GB-13476-1999, the quality is guaranteed. Our main product, GM mould series and forming sets of glcentrifugal machine sell well in GuangDong, ZheJiang, ShangHai, JiangSu, FuJian, HeBei and other places in china. 

Working Principle:
This Pre-stressed concrete pipe pile making machine is mainly used for making concrete pipe. It is in accordance with the standard GB-13476-1999, the quality is guaranteed.

Technical Parameter:

Competitive Advantage:
1) Absorb the advantages of similar products which design and manufacture in China and abroad.
2) Novel structure, make in sections, and couple with bolts;
3) Easy transportation, quickly compose, accurate positioning;
4) It has good overall rigidity and smooth operation.

Quick Detail:
The autoclaving trolley is spliced by the 14th and the 18th channel steel.
Wheels are made of steel forgings so that to improve the wheel life.

Technical Parameter:

Description:
This machine is one kind of conveying and packaging line for wooden pallets which is mainly designed for the finished AAC blocks. The whole mould of product will be moved onto the wooden pallet at one time by means of clamping device for finished products for further conveyance, distribution and packaging on this line. This machine has such characteristics as automatic distribution by the control of computer, precise positioning during conveyance and automatic separation of loaded wooden pallets, in which case it is convenient for packaging and subsequent shipment.

Technical parameters:
1. Centerlines of two chains will be spaced at 550mm. total distance between centerlines of chins will be 1100mm.
2. Chain surface will be in elevation of 653.6mm above the mounting foundation.
3. Distribution Reductor: GS57-0.75kW 15r/min Drive Reductor: GR77-2.2kW 22r/min
4. Drive Chain: 16A P25.4 Carrier Chain: 20A P31.75
5. Conveying Speed: about 13.8/min

Description:
This mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory products two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Working Principle:
1. The steel mould should work together with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2. Put the mixed slurry into the mould and rotate in different directions under the motor driven.
3. In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength. And then, the pole forms around the inner wall of the pole mould.

Competitive Advantage:
1. Welding technology, this enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

Technical Parameter:

Technical parameter of pole steel mould

Description:
This machine is used for making different diameter and length of the circular concrete products by centrifugal casting.
It is equipped with variable speed motor and control equipment. This machine can operate smoothly and regulate speed with wide range.
The bottom of the machine is box-type structure. It is sturdiness, durability, and ease of installation.

Working Principle:
1. This machine operates together with Pre-stressed concrete pile steel mould.
2. Under the motor-driven, the slurry is divided into two-tier under the force of centrifugal.
3. The heavier solids deposited on the inner wall to form sediment layer, while the lighter liquid is separated from the formation of the inner fluid layer.
4. The Sediment is released after dehydration, while the fluid is released.

Technical Parameter:

Competitive Advantage:
1. This spinning machine is designed and manufactured according to the needs of domestic factories, with reference to the Japanese sample machine.
2. The machine is perfect in design and excellent in structure.
3. It operates smoothly with low maintenance and repair rate.

Description:
This machine is a vertical mixing equipment, impeller shaft is the center of the cylinder.
Mixer core consists of motor, reducer, and the impeller, the impeller mandrel is connected with shaft by a coupler.
In the production line, the machine is often installed the mixer core directly in the cylindrical foundation which made of concrete. not steel cylinder.

Technical Parameter:

Description:
 AAC Autoclave is the key equipment in the production of aerated concrete and autoclaved brick. Our autoclave is a principle and cylindrical device made of steel, and has the advantages of good quality and reliable performance.

Applications:
The autoclave is applicable for curing the cut body under high temperature and high pressure, and is also applicable for curing the autoclaved brick under high temperature and high pressure.

Specifications:
We are a professional entity who is manufacturing and exporting autoclave which is used for steaming AAC blocks&light concrete.

Technical Parameter:

Quick Detail:
This equipment is used to have the finished product having been hauled out of autoclave clamped and sent to the expected location (i.e. wooden pallet packaging line), as well as have the bottom panel clamped and sent to the roller conveyor.

Description:
There are two types of hydraulic clamping apparatus, one is for up-and-down layers “cake” and the other is for left-and-right rows of “cake”. This equipment is mounted onto the machining overhead crane and powered by the hydraulic station on that crane. Lifting and clamping will be accomplished by the action of hydraulic oil cylinders. Different synchro devices have been equipped. Such features as no noise, stable operation, and sound synchro performance, etc. are available.

Technical parameters:

We can supply different equipment configuration for following AAC production lines:
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 50,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 100,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 150,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 200,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 250,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 300,000m3

Description:

Project Proposal of AAC Production Line AAC Plant
Annual out put 50,000-300,000m3
I  Production Technique
1. Product Principle
1) Technology Orientation
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006.
2) Production Capacity
The product is aerated concrete block/brick and the output is 150,000m3 per year. The first phase can be equipped according to 100,000m3 per year. There is a reservation of plate in consideration of user's need.
3) Product Specification
Products conform to requirement of 04~07 grade block/bricks stated in GB11968-2006.
General Specifications of Aerated Concrete Block/bricks

Description:
This mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory products two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Working Principle:
1. The steel mould should work together with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2. Put the mixed slurry into the mould and rotate in different directions under the motor driven.
3. In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength. And then, the pole forms around the inner wall of the pole mould.

Competitive Advantage:
1. Welding technology, this enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

Technical Parameter:

Technical parameter of pole steel mould

Description:
This Wire Cage Welding Machine is designed for the Reinforced Concrete pipes Production Lines.
With the Hydraulic, Pneumatic system, and Synchronous transition diameter motor, Our full-automatic Cage Welding machine can make cage from 300-3000mm in diameter and 1000-5000mm in length, it's also capable to make cages with socket&spigot joint and flat joint. especially it can control the angel of spigot automaticly.
besides, this machine also make the double cages for high loading bear. it just needs only 1 worker to operate it.

Technical Parameter:
1. Welding frame size: 230&times;230~380&times;380 (produce pile: 300, 350, 400, 450)
2. Cage length15000mm: (or as request)
3. Ine- rebar Diameter: Ф7.1-Ф12.6mm
4. Coil Diameter: Ф4-Ф6mm
5. Cage body pitch 5-120mm

Competitive Advantage:
1.  Press by cylinder, easy to adjust.
2.  Drived by dc servo motor, the welding speed could be adjusted stably.
3.  Could be drived by up electrode gear or down electrode gear.
4.  Water cooling mode
5.  Two welding direction.

Description:
This machine is a vertical mixing equipment, impeller shaft is the center of the cylinder.
Mixer core consists of motor, reducer, and the impeller, the impeller mandrel is connected with shaft by a coupler.
In the production line, the machine is often installed the mixer core directly in the cylindrical foundation which made of concrete. not steel cylinder.

Technical Parameter:

Description:
AAC Autoclave is the key equipment in the production of aerated concrete and autoclaved brick. Our autoclave is a principle and cylindrical device made of steel, and has the advantages of good quality and reliable performance.

Applications:
The autoclave is applicable for curing the cut body under high temperature and high pressure, and is also applicable for curing the autoclaved brick under high temperature and high pressure.

Specifications:
We are a professional entity who is manufacturing and exporting autoclave which is used for steaming AAC blocks&light concrete.

Technical Parameter:

We can supply different equipment configuration for following AAC production lines:
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 50,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 100,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 150,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 200,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 250,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 300,000m3

Description:

Project Proposal of AAC Production Line AAC Plant
Annual out put 50,000-300,000m3
I  Production Technique
1. Product Principle
1) Technology Orientation
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006.
2) Production Capacity
The product is aerated concrete block/brick and the output is 150,000m3 per year. The first phase can be equipped according to 100,000m3 per year. There is a reservation of plate in consideration of user's need.
3) Product Specification
Products conform to requirement of 04~07 grade block/bricks stated in GB11968-2006.
General Specifications of Aerated Concrete Block/bricks

Description:
This machine is professional used for concrete drainpipes making. The production technology is advanced, safe, reliable, and easy disassembly. We can also design and produce the moulds according to customers' requirement.

Working Principle:
1. This steel mould is working together with the drainpipe spinning machine.
2. Under the centrifugal force, the slurry in the mould is rotated in high speed,   and each component is separated and released under the centrifugal force.
3. In this processing, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength.

Technical Parameter:
1. Self-stressed mould

2. Three stages of Pre-stressed pipe mould

Competitive Advantage:
1. Designing is reasonable.
2. Structure is firm.
3. The product has nice rigidity, and high precision.
4. Internal wall of the mould is smooth.
5. It is easy to operate

Description:
Tension jack series
1.full qualified certificates.
2.fast delivery.

Technical Parameter:

Description:
Ball Mill is one of the important parts in the full set of AAC Production Line .We are professional manufacturer of AAC Production Line, and we can supply complete set of autoclaved aerated concrete plant with 50000, 100000, 150000, 200000, 250000, 300000m3 capacity annually (from 200 m3 to 1000 m3 per day), including plant design, equipments installation, technical instruction, personal training, etc., and also can design and manufacture as per clients' requirement.

Raw material:
Cement, Lime, Sand, Gypsum, Aluminum powder, Water.

Equipment list:
The equipment will be divided into two parts: specialized equipment and universal equipment.
Specialized equipment includes: 
1. Cutting equipment: tilting crane, cutter.  
2.Proportioning equipment: electronic measuring scale, slurry beating machine, slurry storage tank, slurry mixer. 
3.Pouring and autoclave equipment: aluminum powder mixer. pouring mixer, mould, side plate, autoclave truck, carrier car. 
4. Conveying equipment: semi-product crane, end product crane.

Universal equipment includes:
1. Pressure vessel equipment: boiler, autoclave.
2. Crushing equipment: ball miller, crusher.
3.Transportation equipment: crane, lifting machine, feeder, belt conveyor, slurry pump, screw conveyor.
4. Environment protects equipment: dust remover.

Quick Detail:
 AAC autoclaving trolley is spliced by the 14th and the 18th channel steel.
Wheels are made of steel forgings so that to improve the wheel life.

Technical Parameter:

Description:
Our machine adopt cold bonding method to manufacturing bimetal rivets.
Those contact rivets to be widely used in circuit breaker, timer, starter, relays, contactors, switches etc.
Our machine can use following Contact material: Ag, AgNi, AgCdO, AgSnO2, etc.

Technical Parameter:
1. Rated voltage: Three-phase 380V +_10% 50Hz
2. Main motor: 1.5KW
3. Equipment weight: 1200KG
4. Head diameter: 2.4 - 7mm
5. Shank diameter: 1.2 - 3.5mm
6. Shank length: <=7mm
7. Production speed: 5000-9000p/h (stepless speed regulation)
8. Adopt double knives to cut the material

Competitive Advantage:
80% of share in China,
Production capacity of 300 machines in 2007,
Biggest output worldwide, CE & ISO9001:2000,
Competitve price, technical support

For more information please contact us:

We can supply different equipment configuration for following AAC production lines:
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 50,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 100,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 150,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 200,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 250,000m3
- AAC Block/Brick and Panel Production Line in Annual Output (Production Capacity) of 300,000m3

Description:

Project Proposal of AAC Production Line AAC Plant
Annual out put 50,000-300,000m3
I  Production Technique
1. Product Principle
1) Technology Orientation
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006.
2) Production Capacity
The product is aerated concrete block/brick and the output is 150,000m3 per year. The first phase can be equipped according to 100,000m3 per year. There is a reservation of plate in consideration of user's need.
3) Product Specification
Products conform to requirement of 04~07 grade block/bricks stated in GB11968-2006.
General Specifications of Aerated Concrete Block/bricks

Description:
Ball Mill is one of the important parts in the full set of AAC Production Line .We are professional manufacturer of AAC Production Line, and we can supply complete set of autoclaved aerated concrete plant with 50000, 100000, 150000, 200000, 250000, 300000m3 capacity annually (from 200 m3 to 1000 m3 per day), including plant design, equipments installation, technical instruction, personal training, etc., and also can design and manufacture as per clients' requirement.

Raw material:
Cement, Lime, Sand, Gypsum, Aluminum powder, Water.

Equipment list:
The equipment will be divided into two parts: specialized equipment and universal equipment.
Specialized equipment includes: 
1. Cutting equipment: tilting crane, cutter.  
2.Proportioning equipment: electronic measuring scale, slurry beating machine, slurry storage tank, slurry mixer. 
3.Pouring and autoclave equipment: aluminum powder mixer. pouring mixer, mould, side plate, autoclave truck, carrier car. 
4. Conveying equipment: semi-product crane, end product crane.

Universal equipment includes:
1. Pressure vessel equipment: boiler, autoclave.
2. Crushing equipment: ball miller, crusher.
3.Transportation equipment: crane, lifting machine, feeder, belt conveyor, slurry pump, screw conveyor.
4. Environment protects equipment: dust remover.

Description:
Pouring & mixing machine is the main equipment in the batching section covered by the AAC production line. After being metered various kinds of raw material and water will be poured into the cylinder of this pouring & mixing machine, and then all of them will be mixed together into the expected slurry which will be proper for subsequent pouring. Upon opening the discharge butterfly value, the slurry will be poured into the mould for pre-curing.
Technical Parameter:

Quick Detail:
Roller conveyor for side panel is some kind of transportation facility which is used to send the side panels back to the moulding section.
Description:
The mould and side harden and can shut the splendid attire pour the material thick liquid, put and maintain the solidification of foaming base body quietly , the side board bears the weight of the base body and carries on cutting, one yard of shelves , steaming raising again at the same time . Is it raise car to bear the weight of base body (with side board ) is it is it keep means of delivery of cauldron to steam to pass in and out to steam.
Technical Parameter:
Dimension:
4200/4200×600（mm）
4800/4800×600（mm）
6000/ 6000×600（mm）
Specifications:
This machine is a part of mould. It is a part equipment of AAC Production Line.

Description:
Drainpipe spinning machine and drainpipe steel mould both are major equipment of concrete drainpipe making. This machine manufactures concrete drainpipe under the force of centrifugal.
The running wheels in the equipments are rotated in a high speed by the motor driven, which can make centrifugal force. It can form the concrete drainpipe compact.

Working Principle:
1. The Japanese-style pipe centrifugal machine is a new-type pipe centrifugal machine group independently designed and manufactured according to the Japanese sample machine.
2. The drainpipe spinning machine is working together with drainpipe steel mould. Both of them are driven by motor, and the concrete slurry in the mould is rotated in high speed.
3. Under the centrifugal force, different densities substance is separated. After a period of time, the concrete drainpipe is formed after mould release.

Technical Parameter:

Competitive Advantage:
1. High efficiency;
2. Safe and reliable;
3. Economical and practical in use;
4. It products productions with different specifications at the same time.

Description:
The mould and side harden and can shut the splendid attire pour the material thick liquid, put and maintain the solidification of foaming base body quietly , the side board bears the weight of the base body and carries on cutting, one yard of shelves , steaming raising again at the same time . Is it raise car to bear the weight of base body (with side board ) is it is it keep means of delivery of cauldron to steam to pass in and out to steam.

Technical Parameter:
Dimension:
4200/4200×600（mm）
4800/4800×600（mm）
6000/ 6000×600（mm）
Specifications:
This machine is a part of mould. It is a part equipment of AAC Production Line.

Description:
Pouring & mixing machine is the main equipment in the batching section covered by the AAC production line. After being metered various kinds of raw material and water will be poured into the cylinder of this pouring & mixing machine, and then all of them will be mixed together into the expected slurry which will be proper for subsequent pouring. Upon opening the discharge butterfly value, the slurry will be poured into the mould for pre-curing.
Technical Parameter:

</

Description:
Tension jack series
1.full qualified certificates.
2.fast delivery.

Technical Parameter:

Description:

The spreader consists of a spreader frame, a hydraulic station, flip cylinders, clamping cylinders and other components, the main material of spreader frame is made of rectangular tube. Installing in the double main beam and supporting the use with it.(normally say the driving beam 17a).

The role of spreader: lifting and transporting mold; would turn the mold 90-degree; opening and clamping the molds and side panels. Two lifting forms: 1 rope round group; 2 hydraulic lift.

Technical Parameters:

Description:
Pouring & mixing machine is the main equipment in the batching section covered by the AAC production line. After being metered various kinds of raw material and water will be poured into the cylinder of this pouring & mixing machine, and then all of them will be mixed together into the expected slurry which will be proper for subsequent pouring. Upon opening the discharge butterfly value, the slurry will be poured into the mould for pre-curing.
Technical Parameter: