Electric Pole Spinning Machine
    • Product Name:  

      Electric Pole Spinning Machine

    • Model:  Electric Spun Pole Spinning Machine
    • contact us Contact Us
      Detail Product Details

      Description:
      This machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
      This machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.
      The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.

       

      Working Principle:
      1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
      2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
      3. The speed of separation is slow when the viscosity of slurry is high.
      4. It is good for centrifugal sedimentation when the slurry density is different in each component.

       

      Technical Parameter:

      Top end inner diameter (mm)Tread (mm)Running wheel diameter (mm)Length (m)
      15020006007-12
      17020006007-12
      19020006507-15
      23020006506-9
      300 equal diameter20006006-9
      350 equal diameter20006506-12
      3102000650-7806-15

       

      Technical parameter of pole spinning machine 1

      Parameter
      Specs
      Tread of supporting wheel
      L(mm)
      Center distance of drive shaft
      (mm)
      Tread width of supporting roller B1(mm)Tread diameter of supporting roller
      Φ1(mm)
      DL2-5200080080500
      DL3-5200080080500
      DL2-6200080080500
      DL3-6200080080500
      DL2-7200080080500
      DL3-7200080080500
      DL2-8200080080500
      DL3-8200080080500

      Technical parameter of pole spinning machine 2

      Parameter
      Specs
      Diameter of drive shaftΦ3 (mm)Included angle of centrifugal
      α (゜)
      Max.bottom diameter of centrifugal product
      Φ0 (mm)
      Max.length of centrifugal product
      L0 (mm)
      Power of electrical motor
      P(Kw)
      Transmission ratioQ’ty of once producing
      DL2-585/6075~1105501000022-371.71
      DL3-585/6075~11055010000371.72
      DL2-685/6075~1105501200037-451.71
      DL3-685/6075~11055012000451.72
      DL2-785/6075~11055014000451.71
      DL3-785/6075~11055014000551.72
      DL2-885/6075~11055016000551.71
      DL3-885/6075~11055016000751.72

       

      Competitive Advantage:
      1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
      2. Crack resistance can increase about 3~5 times.
      3. Rigidity increases 1~3 times.
      4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
      5. Good durability, can delay the existence and expansion of cracks.
      6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

      Immediately Consult
      Message *
      Name *
      Phone
      Email*
      Verification code *